AG手机客户端

联系我们

保定市AG手机客户端锻造有限公司

联系人:黄经理

电话:0312-2200737

手机:13582266002

地址:保定市莲池区朱庄工业区

行业新闻
模锻件的结构工艺性
模锻件的结构工艺性
Structural process of die forgings
模锻主要靠锻模模膛使坯料成形,锻件形状比较复杂。但为减少制模成本和简化模锻工艺,设计模锻零件时,应根据模锻特点和工艺要求,使零件结构符合下列原则,以便于模锻生产和降低成本。
The die forging mainly depends on the forging die cavity to form the blank and the shape of the forging is rather complicated. In order to reduce die cost and simplify die forging process, the design of die forging parts should be based on the characteristics of die forging and process requirements to make the structure of the parts conform to the following principles, so as to facilitate the production of die forging and reduce the cost.

(1)模锻零件必须具有一个合理的分模面,以保证模锻件易于从锻模中取出,又利于金属充填、减少余块和敷料,锻模容易制造。
(1) the die forging parts must have a reasonable parting surface to ensure that the die forgings are easily removed from the forging die, and it is also conducive to the metal filling, the reduction of the remaining blocks and dressings, and the forging die is easy to be made.

(2)与分模面垂直的非加工面应设计出模锻斜度,以利于从模膛中取出锻件。非加工面的交接处应采用圆角过渡,以利于金属在模膛中流动充填和防止产生应力集中。
(2) the die forging slope should be designed for the non machined surface perpendicular to the parting plane, so as to facilitate the removal of the forgings from the mold cavity. The fillet transition should be adopted at the intersection of non machined surfaces, so as to facilitate the flow and filling of metal in the mold cavity and prevent stress concentration.
Structural process of die forgings
模锻主要靠锻模模膛使坯料成形,锻件形状比较复杂。但为减少制模成本和简化模锻工艺,设计模锻零件时,应根据模锻特点和工艺要求,使零件结构符合下列原则,以便于模锻生产和降低成本。
The die forging mainly depends on the forging die cavity to form the blank and the shape of the forging is rather complicated. In order to reduce die cost and simplify die forging process, the design of die forging parts should be based on the characteristics of die forging and process requirements to make the structure of the parts conform to the following principles, so as to facilitate the production of die forging and reduce the cost.

(1)模锻零件必须具有一个合理的分模面,以保证模锻件易于从锻模中取出,又利于金属充填、减少余块和敷料,锻模容易制造。
(1) the die forging parts must have a reasonable parting surface to ensure that the die forgings are easily removed from the forging die, and it is also conducive to the metal filling, the reduction of the remaining blocks and dressings, and the forging die is easy to be made.

(2)与分模面垂直的非加工面应设计出模锻斜度,以利于从模膛中取出锻件。非加工面的交接处应采用圆角过渡,以利于金属在模膛中流动充填和防止产生应力集中。
(2) the die forging slope should be designed for the non machined surface perpendicular to the parting plane, so as to facilitate the removal of the forgings from the mold cavity. The fillet transition should be adopted at the intersection of non machined surfaces, so as to facilitate the flow and filling of metal in the mold cavity and prevent stress concentration.
  1. 联系人:黄经理
  2. 电话:0312-2200737
  3. 手机:13582266002
  4. 网址:www.ln22.cn
  5. 地址:保定市莲池区朱庄工业区

版权 © 保定市AG手机客户端锻造有限公司 网址:www.ln22.cn 推荐:模锻件,精密模锻件加工,汽车模锻件,电梯模锻件  网站制作: